Author Topic: dead imobilaizer  (Read 277 times)

martyn

  • Full Member
  • ***
  • Posts: 111
dead imobilaizer
« on: March 30, 2018, 11:30:16 AM »
Hi,
   I am hoping someone can advise with the repair or removal of my imobilaizer, although its been off the road for a couple of years I normally run the engine for a half hour and take it for a drive around the estate, but since december my immobilizer wont cancel

Its fitted with a   Apollo Systems 2000 Ltd
              Model   Apollo 2002 
Other markings  08/96      600001258

  I would like to get it running before I reluctantly put it up for sale

                    Regards Martyn
                       
GSI 24v   Senator 24v

Dave the Builder

  • Wanted: Life
  • ******
  • Posts: 3444
  • Swadlincote,Derbyshire
Re: dead imobilaizer
« Reply #1 on: March 31, 2018, 09:16:56 PM »
there pretty simple to remove as a rule, find the immobilizer box , trace the box's loom to where it joins the original loom and chances are you'll figure out what original wires are chopped up, just put the cars loom back to original
If the above post contains spelling mistakes / grammatical errors / poor use of the quote function / a very weak retort, or is generally shyte; it's because I'm feked on a cocktail of drugs,homebrew and carb cleaner.sorry