Welcome, Guest. Please login or register.

Login with username, password and session length




Total Carlton > Carlton Technical > Bodywork > Cavalier alloys?
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Cavalier alloys?  (Read 317 times)
0 Members and 2 Guests are viewing this topic.
SenatorHaz
Jr. Member
**
Posts: 87
« on: October 09, 2006, 04:42:24 PM »
will cavalier turbo alloys fit my senator? Any ideas?
Logged
colonelk
Skiddy skidz FTW
Administrator
Wanted: Life
*****
Posts: 2179
« Reply #1 on: October 09, 2006, 04:59:02 PM »
yes, but will look a touch silly due to offset. Cant guarantee the fronts would fit the calipers without spacers as I dont know how tight theyd be to the spokes.

I had them on mine for ages, and finally got some spacers to space them out Smiley They look good with spacers Smiley But a bit 'Comma Van' without if you know what I mean
Logged
Zee goggles, zhey do nothing!
SenatorHaz
Jr. Member
**
Posts: 87
« Reply #2 on: October 09, 2006, 05:02:31 PM »
whats the goin rate for spackers these days for these? I mean spacers  Cheesy
would 150mph on spacers make any difference to safety over non spacers?
« Last Edit: October 09, 2006, 05:05:28 PM by SenatorHaz » Logged
bstardchild
Wanted: Life
******
Posts: 2638
« Reply #3 on: October 09, 2006, 11:35:50 PM »
Quote from: SenatorHaz on October 09, 2006, 05:02:31 PM
whats the goin rate for spackers these days for these? I mean spacers  Cheesy
would 150mph on spacers make any difference to safety over non spacers?

one word

Don't..........................

(Actually it was three)  Grin
Logged
Cheers

BC

"The Lotus Carlton is not tail happy – honestly -  as long as you accept it has 377 bhp and 419 lb/ft of torque, is rear drive and has no driver aids, it's fine."
Pages: [1]   Go Up
Print
« previous next »
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!