Welcome, Guest. Please login or register.

Login with username, password and session length




Pages: [1]   Go Down
Print
Author Topic: Window Motor Compatability  (Read 325 times)
0 Members and 1 Guest are viewing this topic.
Whippit
Kirkcaldy, Fife
Global Moderator
Wanted: Life
*****
Posts: 3732


Ut olim ingenii necnon virtutis


« on: May 16, 2006, 02:37:57 PM »

I have someone wants to buy my front passenger electric window mechanism.
No Problem, except when I have removed mine it is different to his,
his is from a K Reg

Mine from an H-Reg


According to the EPC there are 4 different types......all replaceable with the latest (Pre 87 needs an adaptor cable)
 But the question is can he replace his with mine?
I'm sure someone here has done it LOL
Whippit Wink
Logged

Murph
Administrator
Wanted: Life
*****
Posts: 6311


Location: Dartford (Kent)


« Reply #1 on: May 16, 2006, 05:15:16 PM »

As long as the socket matches it should work AFAIK.
Have you tried plugging it in to see if it goes?
Logged

Whippit
Kirkcaldy, Fife
Global Moderator
Wanted: Life
*****
Posts: 3732


Ut olim ingenii necnon virtutis


« Reply #2 on: May 16, 2006, 05:21:14 PM »

I am pretty sure its the same socket, but I dont want to send it if it might not work.
Works fine on mine of course.

Also I was sorting a rear passenger side one out for Flash but mine is knackered (just clicky) any idea if I could swap the motor over from the drivers side? (ISDI)
Whippit
Logged

Murph
Administrator
Wanted: Life
*****
Posts: 6311


Location: Dartford (Kent)


« Reply #3 on: May 16, 2006, 05:25:03 PM »

Ah sorry I was assuming that you and your friend were local to one-another.  I still think it'll work fine, but there will be wiser heads than mine to give you a deffo yay or nay.
Logged

Whippit
Kirkcaldy, Fife
Global Moderator
Wanted: Life
*****
Posts: 3732


Ut olim ingenii necnon virtutis


« Reply #4 on: May 16, 2006, 05:42:56 PM »

Nah its an EBay job, though I believe he is a forum member (Grav : Intensephil)
Whippit
Logged

Pages: [1]   Go Up
Print
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!