Welcome, Guest. Please login or register.

Login with username, password and session length




Pages: [1]   Go Down
Print
Author Topic: Changer sticking - removal and changing location  (Read 359 times)
0 Members and 2 Guests are viewing this topic.
Diplo-Matt
Hero Member
*****
Posts: 951



« on: May 05, 2006, 10:22:30 PM »

I think my changer needs cleaning. I've fitted some JBL speakers in rear parcelshelf and the extra vibration seems to be causing the changer to skip. Obviously this only happens when the volume is high but it is annoying. My bro had a similar problem in his BMW, he just took it out and cleaned the change and the problem went away. Whats the best way to do it/ dismantle it sort of thing. Would it be worth mounting it on some extra foam? also has anyone moved the changer before? I thinking of putting either under a seat or in the glove compartment.

Cheers

Matt

Logged

Carlton 2.6 Estate
Monza GSE
Senator Series A
jonnybear
Carlton Mad
Wanted: Life
******
Posts: 1838


1993 (k) Carlton CDi 2.0i, Tyne And Wear (NE)


« Reply #1 on: May 07, 2006, 09:13:22 PM »

Had the same problem my self, i put mine on the floor in the boot with some sticky velcrow on it, sorted the problemo for me  Wink

Good luck jonny
Logged
flash911
NO!! Not More Rust FFS!!
Wanted: Life
******
Posts: 3665


12 Cylinders, 48 valves. ;0)


« Reply #2 on: May 09, 2006, 09:27:02 AM »

i had my changer in the glove box with some foam round the sides and at the back , never had a prob , well till the radio blew up that is , not fault of the changer tho  Wink
Logged

One Day!
Pages: [1]   Go Up
Print
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!