Welcome, Guest. Please login or register.

Login with username, password and session length




Total Carlton > Carlton Sales > Wanted > C30SE 24v clutch friction plate
Pages: [1]   Go Down
« previous next »
Print
Author Topic: C30SE 24v clutch friction plate  (Read 127 times)
0 Members and 2 Guests are viewing this topic.
carltonsteve20
Full Member
***
Posts: 132
« on: October 27, 2011, 10:40:04 PM »
im after a cheap new or good second hand clutch friction plate for a 24v as i fitted a new clutch not long ago and then input shaft oil seal went on gearbox and saturated clutch, other parts of clutch are fine so dont wanna fork out for complete new clutch kit, just want a decent second hand fricton plate.
Logged
bstardchild
Wanted: Life
******
Posts: 2638
« Reply #1 on: October 27, 2011, 11:57:28 PM »
Quote from: carltonsteve20 on October 27, 2011, 10:40:04 PM
im after a cheap new or good second hand clutch friction plate for a 24v as i fitted a new clutch not long ago and then input shaft oil seal went on gearbox and saturated clutch, other parts of clutch are fine so dont wanna fork out for complete new clutch kit, just want a decent second hand fricton plate.

Plenty of place will re-line it for a few quid
Logged
Cheers

BC

"The Lotus Carlton is not tail happy – honestly -  as long as you accept it has 377 bhp and 419 lb/ft of torque, is rear drive and has no driver aids, it's fine."
Catho
Hero Member
*****
Posts: 651


The faith has finally been restored!!
« Reply #2 on: October 28, 2011, 08:55:23 AM »
Got my original LUK Clutch disc relined, pressure plate skimmed/resurfaced, and a new release bearing all done for £45. So re-lining the disc should cost a fraction of that.

It's like new.....but a new LUK costs about £190!!
Logged
After 10 years........she's back on the road!!!
Pages: [1]   Go Up
Print
« previous next »
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!