Welcome, Guest. Please login or register.

Login with username, password and session length




Total Carlton > Carlton Technical > Sparky Bits > Alarm sensors boot
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Alarm sensors boot  (Read 279 times)
0 Members and 2 Guests are viewing this topic.
Einarrson
Wanted: Life
******
Posts: 1279
« on: August 22, 2011, 04:07:44 PM »
I did something to my boot and now the alarm always pips 3 times to indicate that something isn't closed. I've looked everywhere for the sensors that must have come dislodged but cant find them. Any ideas where they might be?

Logged
Dave the Builder
Wanted: Life
******
Posts: 2560


Swadlincote,Derbyshire
« Reply #1 on: August 22, 2011, 04:46:48 PM »
there's a black pin switch on the bracket that holds the hinge on the near side.
you may have pulled the wire off ?
Logged
If the above post contains spelling mistakes / grammatical errors / poor use of the quote function / a very weak retort, or is generally shyte; it's because I'm feked on a cocktail of drugs,homebrew and carb cleaner.sorry
Einarrson
Wanted: Life
******
Posts: 1279
« Reply #2 on: August 24, 2011, 11:55:32 PM »
Thanks, I'll have a closer look there.
Logged
Pages: [1]   Go Up
Print
« previous next »
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!