Welcome, Guest. Please login or register.

Login with username, password and session length




Total Carlton > Carlton Technical > Bodywork > Sill trims.
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Sill trims.  (Read 602 times)
0 Members and 1 Guest are viewing this topic.
30N
Jr. Member
**
Posts: 94

South Nottingham. COYP
« on: March 17, 2011, 08:10:17 PM »
Can anyone tell me or show me the link the spacings for the heads that are welded onto the sill for the white clips (anyone bought any lately) and if there are any measurements for the brackets that holds the rear bumper ends in place
Logged
3.0 CDX and a 3.0 Diamond.Grace,space and pace
kevinfourlegs
The only TC member with four legs
Wanted: Life
******
Posts: 1452

Am I the only TC member in south Wales?
« Reply #1 on: April 21, 2011, 07:55:22 AM »
I'm going to be dismantling a Diplomat, so if its any use I can take measurements for you?
Logged
RWD, as it was, as it is, as it should be for real men.
melinx
Wanted: Life
******
Posts: 2936


WHO created me in his own image ?
« Reply #2 on: April 21, 2011, 08:23:36 AM »
If you have TIS it has the placement diagram for the sill clip rivets: I don't have the expertise to post it up for you but I'm sure that someone on the forum has Wink

Failing that, I can print it off and post it to you ?
« Last Edit: April 21, 2011, 08:39:01 AM by melinx » Logged
Pages: [1]   Go Up
Print
« previous next »
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!