Welcome, Guest. Please login or register.

Login with username, password and session length




Total Carlton > Carlton Technical > Sparky Bits > Alarm Question
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Alarm Question  (Read 252 times)
0 Members and 2 Guests are viewing this topic.
CyberBug
Newbie
*
Posts: 4
« on: November 22, 2010, 11:55:28 AM »
Hello,

I have question about electrical installation on Omega A/Carlton....I'v been looking for connector that is used to connect original Alarm Unit behing glovebox, and I did found one connector on top glovebox with about 25 pins ... is this connector used for connecting original alarm unit?

Thanks and best regards...
Logged
mrchaz
Sr. Member
****
Posts: 385
« Reply #1 on: November 22, 2010, 06:10:39 PM »
Yes it is
Logged
4.0 24v LC Rep
Vectra SRi140
CyberBug
Newbie
*
Posts: 4
« Reply #2 on: November 23, 2010, 12:38:36 PM »
thanks...could somebody post pinout for this connector...
Logged
Pages: [1]   Go Up
Print
« previous next »
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!