Welcome, Guest. Please login or register.

Login with username, password and session length




Total Carlton > Carlton Technical > Bodywork > Removing bumper - headlamp replace
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Removing bumper - headlamp replace  (Read 312 times)
0 Members and 2 Guests are viewing this topic.
Gordon
Jr. Member
**
Posts: 56
« on: September 15, 2010, 12:25:33 PM »
Daft question : need to replace headlamp and I have to undo bumper at one side to get it in. I'm looking for the 'bolt' I need to undo (according to Haynes) under the wing. In front of the wheel. Cannae find any bolt, just some clip arrangement! Help... Undecided
Logged
Murph
Administrator
Wanted: Life
*****
Posts: 6297


Location: Dartford (Kent)
« Reply #1 on: September 15, 2010, 12:39:30 PM »
It's a 13mm bolt and it goes through the chassis rail. It is in plain view on the drivers side but on the passenger side it is hidden next to the carbon canister braket.
Logged
Gordon
Jr. Member
**
Posts: 56
« Reply #2 on: September 15, 2010, 02:34:43 PM »
Thanks. Its the driver's side needs removing but I was looking under the passenger side. Cheers.
Logged
Pages: [1]   Go Up
Print
« previous next »
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!