Welcome, Guest. Please login or register.

Login with username, password and session length




Total Carlton > Carlton Technical > Sparky Bits > Wiper Problem
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Wiper Problem  (Read 245 times)
0 Members and 1 Guest are viewing this topic.
Pedro
I'M A FILTHY TORY!
Global Moderator
Wanted: Life
*****
Posts: 6605


Location: York
« on: June 23, 2010, 07:12:10 PM »
The high/2 speed on the wipers has stopped - any ideas what it could be?
I have a spare motor and linkage if required.

Intermittent and low/1 speed work fine......first thought is switch.
Logged
Do you know what "Nemesis" means? A righteous infliction of retribution manifested by an appropriate agent. Personified in this case by an 'orrible c*nt... me.
von-opel
Full Member
***
Posts: 240


"Broadsword calling danny boy"
« Reply #1 on: June 23, 2010, 09:14:54 PM »
Try swapping the white & yellow wires that go to the motor (white is batt+ to fast commutator brush). Or else unplug, take a wire from batt+ .....to white=fast / to yellow=slow,
Logged
Pedro
I'M A FILTHY TORY!
Global Moderator
Wanted: Life
*****
Posts: 6605


Location: York
« Reply #2 on: June 23, 2010, 09:49:07 PM »
Will try that tomorrow, Mr. Opel and report back! Wink
Logged
Do you know what "Nemesis" means? A righteous infliction of retribution manifested by an appropriate agent. Personified in this case by an 'orrible c*nt... me.
Pages: [1]   Go Up
Print
« previous next »
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!