Reset central locking

[shanless]

I tried to post this in the Sparky Section....but couldn't start New Thread..........I have 3.0 Diamond and the central locking is 'up the left'.....when I 'lock' the drivers door all locks close ( except the tail gate ) and then unlock again.....if I lock from the tail gate..all doors lock and unlock again.

Cheers
   Kev

[melinx]

http://totalcarlton.com/forums/index.php/topic,9917.msg79367.html#msg79367

[von-opel]

The repetitive lock/unlock scenario is invariably caused be the central locking servo motors being out of adjustment. They're very critical e.g. the main passenger doors need to be adjusted with a 0.079in. clearance, the main culprit however is usually the boot/tailgate servo motors, try that first.