Welcome, Guest. Please login or register.

Login with username, password and session length




Total Carlton > Carlton Sales > Wanted > Dash plugs and Tech 1 socket with plug
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Dash plugs and Tech 1 socket with plug  (Read 378 times)
0 Members and 2 Guests are viewing this topic.
doz
Wanted: Life
******
Posts: 1309


Southampton
« on: June 14, 2009, 08:42:01 PM »
Hi all. I'm gonna attempt the digi dash to analoge on my Gsi. Does anybody have a old loom hangin about who can cut the analoge plugs off with a decent length of cable attatched? also can they also cut of the diagnostic plug off to? again with a decent length of cable? I'll need the blanking plug with it also. Beer tokens, groats or sexual favours waiting!!!!
Logged
Wafting air biscuits up the noses of the bureaucrats since 1970 
92 GSI 24v manual
92 LC
Pedro
I'M A FILTHY TORY!
Global Moderator
Wanted: Life
*****
Posts: 6605


Location: York
« Reply #1 on: June 14, 2009, 10:45:23 PM »
It's not difficult, Mr. Doz - I did it with the help of Mr. Chaz's notes ( in the "how To" section) and works well.  Wink

End result also looks better than the gay digi clocks.............
Logged
Do you know what "Nemesis" means? A righteous infliction of retribution manifested by an appropriate agent. Personified in this case by an 'orrible c*nt... me.
SJC
Full Member
***
Posts: 218

Location: Alloa, Scotland
« Reply #2 on: June 17, 2009, 01:26:18 PM »
Think I've got a diagnostic plug with a few inches of cable...

Will check and report back.
Logged
martyn
Full Member
***
Posts: 106
« Reply #3 on: June 18, 2009, 09:11:07 PM »
HI. I have a spare harnes from a facelift gsi,manual with digi. which sockets do you require, I think they are the blue & white 26 pin plugs, as for the wire would you like it from the the plugs to it termination.
Martyn
Logged
GSI 24v   Senator 24v
doz
Wanted: Life
******
Posts: 1309


Southampton
« Reply #4 on: June 18, 2009, 09:53:23 PM »
Hi Martyn thanks for the offer but I'm removing the digi dash and replacing with analogue so I need the wiring for the Big ben clocks not the urber cool LCD's  Wink
Logged
Wafting air biscuits up the noses of the bureaucrats since 1970 
92 GSI 24v manual
92 LC
carltonman
Wanted: Life
******
Posts: 3209


Ellon, UK
« Reply #5 on: June 18, 2009, 09:56:52 PM »
Digi FTW.
Logged
martyn
Full Member
***
Posts: 106
« Reply #6 on: June 18, 2009, 10:13:07 PM »
HI. Ive just scrapped a senni 24v manual would these be the same as carlton
Logged
GSI 24v   Senator 24v
SJC
Full Member
***
Posts: 218

Location: Alloa, Scotland
« Reply #7 on: July 05, 2009, 08:30:54 AM »
Quote from: SJC on June 17, 2009, 01:26:18 PM
Think I've got a diagnostic plug with a few inches of cable...

Will check and report back.
I've got a diagnostic plug with about 6 inches of cable but I don't have the cap/blanking bit I'm afraid.

Yours for the postage if any use to ya.
Logged
Pages: [1]   Go Up
Print
« previous next »
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!